can I get a iP address of any echoback server other than ublox?

0 votes
while trying to connect to ublox echoback server I am getting a +CME ERROR: operation not allowed. I don't know whether it is a problem with the server or my module.so can anyone share the IP address of any echoback server?

here is the at commands log

AT+COPS?
+COPS: 0,0,"AT&T",8

OK
AT+CEREG?
+CEREG: 0,1

OK
AT+CGATT?
+CGATT: 1

OK
AT+CIND?
+CIND: 5,3,1,0,0,1,0,0,1,0,0,2

OK
AT+CSQ        
+CSQ: 19,99

OK
AT+CPIN?
+CPIN: READY

OK
AT+CNUM
+CNUM: "Line 1","+15446780678",145

OK
AT+CGPADDR
+CGPADDR: 1,10.219.82.176
+CGPADDR: 2,0.0.0.0,0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
+CGPADDR: 3,0.0.0.0,0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0
+CGPADDR: 6,0.0.0.0,0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0

OK
AT+CGDCONT?
+CGDCONT: 1,"IP","prod04.net","10.219.82.176",0,0,0,0
+CGDCONT: 2,"IPV4V6","VZWADMIN","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 3,"IPV4V6","VZWINTERNET","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
+CGDCONT: 6,"IPV4V6","VZWCLASS6","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0

OK
AT+CGACT?
+CGACT: 1,1
+CGACT: 2,0
+CGACT: 3,0
+CGACT: 6,0

OK

AT+USOCR=6  
+USOCR: 0

OK
AT+USOCO=,0"195.34.89.241",7  
+CME ERROR: operation not allowed
by Chandana asked Mar 13
by Chandana reshown Mar 16
29 views
0 votes
Set up your own, on a server you control?

This looks dyslexic, work on the commas and syntax

AT+USOCO=,0"195.34.89.241",7
by clive1 answered Mar 13
sorry It was a typing mistake.
actual command I tried was
AT+USOCO= 0,"195.34.89.241",7  
but still I am getting the same error. I don't know whether it is because of sim or the server connectivity