Chip that support "AT+GED=5 command"

0 votes
I want to know if which u-blox chip can support AT+CGED=5 command. I have a Lisa-U230 and I tried sending the command but it's response is  "ERROR", I guess that it is because it does not support this command.

Which chip would support it? Sara U230 or U270 could support it? And what is the response time of this command?

 

Many thanks for your help.
by juranga asked Feb 4, 2016
322 views
0 votes
Use AT+CGED=? to see the supported modes on a given modem/state

Also per manual there are times when modes are not supported, like in the absence of a SIM card, or a SIM card with a pin, which hasn't been unlocked.
by clive1 answered Feb 4, 2016
Does anybody know more about AT+CGED=5 command? Response time, chips that support it...

Because the manual does not have enough information.
0 votes
I am still looking for some information but I can not find anything.

Is there any information somewhere about this command and chips that support it?
by juranga answered Feb 10, 2016
0 votes

Have you looked at AT commands manual?

If you search for AT+CGED command and then scroll down to notes you will find the following:

7.20.4 Notes
LISA-U / SARA-U
• <mode>=5 and 6 are not supported.

LISA-U200-00S / LISA-U200-01S / LISA-U200-02S / LISA-U200-52S / LISA-U200-62S / LISA-U200-82S /
LISA-U230 / LISA-U260 / LISA-U270
• <mode>=128, 129, 130, 131, 132, 133 and 134 are not supported.
• The <details> parameter is not supported.
LISA-U200-01S / LISA-U200-02S / LISA-U200-52S / LISA-U200-62S / LISA-U200-82S / LISA-U230 /
LISA-U260 / LISA-U270
• The SIM verification is needed.
LISA-U200-00S / LISA-U200-01S / LISA-U230 / LISA-U260-01S / LISA-U270-01S
• The set command can be issued when the module is not registered to the network.
LISA-U1
• <mode>=128, 129, 130, 131, 132, 133 and 134 are not supported.
• The <details> parameter is not supported.
SARA-U260-00S / SARA-U270-00S / SARA-U270-00X / SARA-U280-00S
• <mode>=128, 129, 130, 131, 132, 133 and 134 are not supported.
SARA-G / LEON-G
• The <details> parameter is not supported.
SARA-G300 / SARA-G310 / SARA-G340-00S / SARA-G340-01S / SARA-G350-00S / SARA-G350-00X /
SARA-G350-01B / SARA-G350-01S / LEON-G100-06S
• <mode>=128, 129, 130, 131, 132, 133 and 134 are not supported.

 

It seems that SARA-G and LEON-G would be the only modules that support +CGED=5.

by grumpy answered Feb 12, 2016
Many thanks grumpy!

So, is not there any chip that support this command?
SARA-G and LEON-G
0 votes

So it seems that only Sara-G and Leon-G chips could support  AT+CGED=5 command, but could anyone confirm this? The manual does not mention anything about the response time of the command...

by juranga answered Feb 15, 2016
Sara-G and Leon-G chips support  AT+CGED=5
This is a network related command so I would say 3 min typicall
Could someone confirm that the response time is 3 min? I am very interested in this command but 3 minutes it is too much time...
–1 vote

Hi everyone..i do not have much experience but as per my knowledge and also per manual there are times when modes are not supported, like in the absence of a SIM card, or a SIM card with a pin, which hasn't been unlocked.

pcb prototypes

by IzzyRiess answered Jun 9, 2016
by IzzyRiess edited Jun 28, 2016
website banner