NINA-B2 Datasheet: SWITCH_1 or SWITCH_2

0 votes

From NINA-B2's datasheet UBX-18006649 - R03 as of 14-Dec-2018:

  • paragraph 2.5.2 at page 13:
    If SWITCH_2 is driven low during start up, the UART serial settings are restored to their default values.
  • table 6 at page 16:
    SWITCH_1: Restore UART serial settings / Enter bootloader.
Which one is right?
by lorcap asked Jan 10

Please log in or register to answer this question.

website banner